Site to Court
A regulation court built to your site, concrete slab, tempered glass walls, and turf surface ready for play.
What Goes Wrong
Arizona’s caliche layer sits just below the surface and will crack a slab that was poured without adequate excavation.
The builder probes the soil depth before layout, then excavates to stable ground so the base slab cures level and holds load.
A slab poured without a designed slope traps monsoon runoff under the turf, degrading the surface bond and the frame anchors.
Drainage slope is engineered into the slab pour itself, so water clears the court surface after rain rather than pooling beneath it.
Anchoring the steel frame to an uncured slab shifts the anchor points as concrete settles, pulling glass panels out of alignment.
The steel frame is anchored only after the slab has fully cured, keeping anchor positions fixed and glass panel alignment true.
Lighting positioned without accounting for the glass wall angles creates glare that makes evening play difficult and unsafe.
Fixtures are positioned to cover the full playing area while directing light away from the glass panel faces to eliminate glare.
Scope of Work
A full padel court build includes every stage from ground assessment through final sign-off, nothing is left as a separate contract.
The builder measures the available footprint, checks soil conditions, and confirms the site can support a regulation slab and frame.
Excavation, grading, and a concrete slab pour with drainage slope built in, sized for a 33x66-foot court footprint including clearance.
The structural steel frame is anchored to the cured slab, then tempered glass panels are fitted to regulation back and side wall heights.
UV-stable artificial turf is laid over the slab, seamed, and secured flat so the surface stays consistent across the full court area.
Net posts are set to regulation height, the net is tensioned and fitted, and perimeter fencing panels are installed around the court.
Lighting fixtures are mounted and angled to cover the playing area evenly without creating glare off the tempered glass panels.
Single-court build on a residential lot.
Multi-court layouts for clubs and community facilities.
Court construction for developers and property managers.
Assessment and prep of an existing slab for court use.
Why Choose Us
Every job is arranged through a local court builder who knows Arizona ground conditions, and every stage is documented in writing before work begins.
Base prep, surfacing, drainage, and lighting are each listed as separate line items so you know exactly what is covered.
The builders arranged here have worked Arizona’s caliche and hardpan ground and plan excavation depth accordingly.
Every enquiry starts with a site visit to measure the space and check soil and drainage before any scope is agreed.
Frame alignment, glass panel fit, turf seams, and drainage are all checked and signed off before the job is handed over.
Local court builders are arranged across Arizona, so residential and commercial sites statewide are both within reach.
The Process
01
Submit your site details and a local court builder is arranged to visit, measure the space, and check soil and drainage conditions.
02
You receive an itemised estimate covering base prep, steel frame, glass panels, turf surface, drainage, and lighting as separate line items.
03
The builder completes each stage in sequence and conducts a final walkthrough before the finished court is handed over to you.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Single padel court | $40,000-$80,000 |
| Premium padel court with lighting | $60,000-$120,000 |
| Enclosed or custom padel court | $100,000-$150,000 |
Every enquiry starts with an on-site evaluation and an itemised written estimate, no commitment required.