Basketball Court Installation Questions

Yes, but the grass needs to come out first. The ground is then leveled and a stable base is set before any playing surface goes down. Skipping that step leads to a court that shifts, sinks, or plays unevenly within a season.

Not always. Concrete is the most common base because it stays firm under heavy use, but asphalt is a solid alternative. Modular tiles can go over an existing concrete or asphalt slab, so a new pour is not always required.

Cracks widen with each monsoon season and each freeze-thaw cycle. A small surface crack that costs little to seal becomes a structural base repair if water gets underneath and erodes the sub-base. Addressing it early is significantly cheaper.

Cost depends on court size, base material, and site prep needs. A half court on a flat lot with an existing slab costs less than a full court that needs excavation through caliche. An on-site evaluation is the only way to give an accurate number.

A smaller half court with modular tiles over an existing flat slab keeps costs down. Avoiding new concrete work reduces the budget significantly, though the site still needs to be level and stable before tiles are laid.

Sonoran Desert UV and heat accelerate fading and surface degradation on coatings not rated for high UV exposure. Specifying a UV-stable acrylic coating from the start adds minimal cost and extends the court’s usable life considerably.